Hornby Terrier. The New Build...

Recommended Posts

Hornby Terrier, the new version. R3767. BR Lined Black, Early Crest. 32655 (Stepney).

General views.... after I had installed a loco crew, and changed the colour of the reverser lever and regulator.... and the gauge glasses.





The extra pipes, which fit under the buffer beams....


Initial modifications....

All locos deserve a crew!

The gauge glasses look better (IMO) in white than "Copper" or "Brass", and the Reverser is not likely to be made of Brass or Copper, as it would likely bend! (It is coloured "Copper" or "Brass"as it comes.

The Regulator is plain black as it comes.... I prefer it in red!





Getting into the cab....body dis-assembly.

The body, boiler, side tanks, cab and bunker, are held onto the metal footplate by 7 screws. one into the smokebox, two each side into the side tanks, and two into the cab/bunker.




The cab seems to be clipped to the boiler, but there are a few pipes from the boiler that are probably glued into the holes in the cab front.... I did not try to part the cab from the boiler as I did not relish trying to get the pipes back into their holes, even if they were not glued in!


DCC Decoder Fitting.

The 6-Pin socket is in a position that precludes the use of most, if not all, direct plug 6-pin decoders.


The Hornby R7150 6-pin decoder has a short wire harness and 6-pin plug.

The wires are just about the maximum length that can be folded over the decoder, and still fit inside the body.

Some insulating tape is a very good idea to cover the exposed connexions, and prevent the decoder coming into contact with any metal....





It is one of very few 6-pin decoders that can be fitted, it would seem.... I have got the Hornby decoder, and fitted it to mine. Less hassle for me.


I have fitted Kadee NEM couplings to my Terrier. #19. The NEM pockets on the Terrier are at the correct height when seated properly, but the Kadee couplings require packing under the shaft inside the pockets, otherwise they are a bit of a loose fit and droop.





Coupled to a Hornby Ex LNER Class O1 tender chassis....again the NEM pocket is at the correct height....


Share this post

Link to post
Share on other sites

Nice work on the Hornby Terrier, I like the extra details you have added to the loco and I like the crew.😉

Share this post

Link to post
Share on other sites

Hi Kev.


The crew are from a Bachmann pack. There are currently two packs containing Steam era locomotive department type figures.

1950s Train Crew Bachmann Model 36-407 Scale: OO (1/76)

Locomotive staff  Bachmann Model 36-047 Scale: OO (1/76)


Some really good figures. Some can be modified, by removing oil cans, cleaning rags, wheel hammers, etc. for more general use.

Some have the arms as seperate mouldings, glued into place. These can be removed and replaced differently if required....

Edited by sarah
URL correction

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.