sarah

Members
  • Content count

    119
  • Joined

  • Last visited

  1. The "finished" model... WRENN CCT Modified chassis. BR "Crimson" livery. BR Lettering.from HMRS (PC Models) BR Sheet. Hornby Van C (Untouched save for NEM Kadee Couplings added...) and Wrenn CCT.
  2. The "finished" model... Parkside Kit SR PLV SR Malachite Green "Southern " lettering and number transfers from the. HMRS (PC Models) SR Sheet.
  3. The "finished" model... Ks Plastic Kit SR CCT. (Roof Vents still needed...) SR Olive \Green "Southern Railway" and number transfers from the Ks Kit. Added BR Lettering. from HMRS (PC Models) BR Sheet.
  4. A project that has been awaiting for some time... Converting an "open cab" Hornby GWR Class 2721 0-6-0 Pannier Tank loco to the "Closed Cab" version. The number will stay the same for now... it isn't that important! ;) The rear of the cab comes from a Hornby LMS 3F 0-6-0 Tank Loco ("Jinty") that I am converting to "open cab"!. (Using a Crownline kit….) The original 2721 roof has been re-used, extended with plastic card... Spare J94 reverser and handbrake parts have been used, but needed cutting down a lot! I think the reverser is still a bit tall... but will have to stay as is. The beginning... The early photo above shews the Handbrake and Reverser at full height, before being cut down... Almost completed building work... The rear of the cab and Bunker... After initial painting, adding Buffer beam numbers, and Yellow Restriction Spot (Not on the Railroad models...).. The whistles... Hornby provide one short type, and one long type (the ols type from the B12, etc... I have replaced the long thin B12 whistle with another of the "Short" type, but not pushed all the way in so as to resemble the slightly taller second whistle. GWR Locos had two whistles, the higher pitched "Road" whistle for warnings, and the lower pitched "Brake" whistle, which was used to signal to the Guard of a loose coupled loco to apply the brake... The "Portholes" (Spectacles) have had "brass" rims added using a "Brass" or "Gold" coloured fibre tip pen. These pens, including a silver one, have also been used to highlight the cab pipes, etc. Comparison between two 2721 locos... The Open Cab, and the Closed Cab versions... Another Hornby 2721...this one is staying Open Cab... After initial detail painting, fitting crew, Cut down J94 Reverser, and Hornby Handbrake... On this one, the top of a Hornby Handbrake has been attached to a section of plastic tube... Hornby Railroad 2721, just about "out of the box"... Another "Out Of The Box 2721... not so detailed as the later Railroad and Main Range models... less seperate handrails... Hornby Pannier Parade!
  5. Hornby 2017 Catalogue...

    Thanks for the link fixing Jack...
  6. Hornby 2017 Catalogue...

    Hornby 2017 Catalogue... Here is what I think is the chaepest offer at the moment? http://www.ebay.co.uk/itm/HORNBY-R8154-Hornby-Catalogue-2017-/332050773442 £6.99 Free Postage... The same company also lists some at £0.99 Start, BUT with £1.99 Postage... Some are paying more via auction than Buy It Now! New Low Price... £6.89 FREE POSTAGE... http://www.ebay.co.uk/itm/Hornby-R8154-Hornby-Catalogue-2017-Edition-Sixty-Three-63-FREE-POSTAGE/122300370471 Just had a look at the Hornby Magazine site... (My Bold....) So... It looks like the combined offer is ONLY at WH Smith Branches, in Transport Locations (Railway Stations etc?) and High Street Locations.
  7. Happy New Year 2017...

    Wishing you all a Happy New Year... We will be asleep (hopefully!) when midnight turns tonight.... ;) Regards, Sarah.
  8. A new Home for Arboretum Valley

    This "Nellie" was one of the last... the "Somerset & Dorset" blue livery one... The blue looks very well faded, and the number on the tank sides is just fading away... looks rather good!
  9. Warning Signs For Model Railways?

    Nice tramway sign! From further investigation, it seems that DCC line voltage is actually 18,000 mVolts AC... or 18 Volts AC....according to a PECO Shows-You-How booklet... I am just starting on the DCC road....
  10. A while ago now, some "exhibition layouts" had a more fun way of saying "Do Not Touch". Like the Southern Railway "Do Not Touch Conductor Rails" notices... Danger! Do Not Touch Conductor Rails 12,000 mVolts (This was before Zero 1 and the DCC revolution!) Also... Atchung! Ninen Fingerpoken! Now older Transformers had a loud "Hum", quite noticable. Modern "Plug-top" (Switch Mode?) Transformers are much quiter... so it can be hard to tell if they are working! That hum is the 50 cycles a second frequency of the 240 Volts AC mains... (Or 50 Hertz, not the car rental co, the measurement unit! ;) ) You get the same sound from a National Grid Substation, still 50 Hertz, but a few thousand volts (Or KV, Kilovolts!). Current (!) BR Overhead power lines are energised at 25KV...25 thousand volts. Most Model Railways are energised at 12,000 mV (millivolts) DC Control, or around 15,000 mV (DCC). That is 12Volts DC, and around 15 Volts DCC!
  11. Tri-ang Railways and Tri-ang Hornby "Smoking" Locos. Tri-ang Railways first marketed Smoke Unit fitted model locomotives in 1961, using patented technology from Seuthe in Western Germany. These early smoke units were brass tubes, with a heating element inside. A wire from the bottom of the element was wired in parrallel to the loco motor, so the amount of voltage, and therefore heat was governed by the speed control setting. The "Smoke Pipe" (which is a very thin tube, a bit like a hyperdermic needle) takes the vaporised oil (smoke) up and out of the top of the unit, and the chimney. The smoke was expelled by the smoke pipe in "puffs" that were not synchronised to the driving wheel speed, and continued for a short time after the loco was stopped. These Smoke Pipes can get blocked. (3 Amp Fusewire is said by Tri-ang to be the right diameter to rod out a Smoke Pipe, or a strand of electic wire can be used) Removing the Smoke Pipe from Seuthe type units and cleaning it every so often is a good idea, though you have to be careful to get it the right way up putting it back!... The angled end is the bottom end... The Smoke Pipes can also fall out of the unit if the locomotive is turned upside down! So be aware! New locomotives had a label over the chimney to stop this happeneing in transit... Seuthe are still trading today, and make a wide variety of smoke units for locomotives, and buildings, etc. They also still make the Smoke Oil... In 1964, the Seuthe units were mainly repalced by the introduction of Synchrosmoke. (Earlier known as various spellings, Synkro-smoke, etc...) This was Tri-ang Railways own design, and was designed after seeing a Mr. Fry of Ireland's smoking locomotives. He wanted a good up-front payment to disclose his design, so the "men from Margate" went away and came up wiyh their own design. This used a cast metal box, with a piston in a cylinder, driven by a gear wheel by the motor worm, to push air into the box. The box contained a wadding material, and on top of this was a heating element, that looks a little like a fuse, with a metal conducting cap on each end. The element was wired in parrallel to the loco motor, so the amount of voltage, and therefore heat was governed by the speed control setting. The forced air expelled the smoke in "puffs" that were synchronised to the driving wheel speed by the gear drive. Complicated to describe, but it works! There were two main "Box" castings" Long" and "Short". The long one was used in the 4-6-2 locos, with different holes in the lid for the different chimney positions. The short one was used in the tank locos, and the B12 4-6-0, with different lids and extensions. The smoke oil has come in a variety of plastic tubes and sachets over the years. The last Hornby issue I have seen was a small plastic "pot" with a screw lid (R.8111) Hornby earlier supplied Smoke Oil as R.521 in a white Sachet. For the ultimate in originallity... the Tri-ang stuff can be found for sale on the "net"....[ Until the Hornby "Pot", the various packs of Smoke Oil had the part number R.521, including the sachets sold by Hornby to go with the later Smoke fitted locos that use a plastic smoke unit, including the 4-4-0s (Schools, Midland Compound, County, Hunt) and the GWR 2-8-0 Goods Loco. These plastic units are prone to overheat if run without oil for any length of time... These used a syringe with a plastic spout to transfer the oil to the unit. The first Seuthe type used a real glass "pipette" as a filling "funnel" Later a platic funnel was used. Most of the tubes were marked in various colours:- Tri-ang Seuthe Smoke Pat. Made in W. Germany. Some Examples of Seuthe Type smoke unit fitted locomotives. R.52S B.R. "Jinty" 0-6-0 Tank Locos (1961-1963) R.53S B.R. Green Princess Royal class 8p 4-6-2 Tender Locos (1961-1962) R.54S "T.C. Series" Transcontinental Pacific Tender Locos.(1961-1963) R.59S B.R. Class 3MT 2-6-2 Tank Locos (1961-1963) R.150S B.R. B12 4-6-0 Tender Locos (1961-1964) R.251S B.R. Lined Black "Deeley" Class 3F 0-6-0 Tender Locos (1961-1964) R.258S B.R. Lined Maroon Princess Royal class 8p 4-6-2 Tender Locos (1961-1963) R.259S B.R. Britannia Class 7 4-6-2 Tender locos (1961-1964) R.350S B.R. Class L1 4-4-0 Tender Locos (1961-1963) R.354S "Lord Of The Isles" 4-2-2 Tender Loco (1961-1962) R.356S B.R. Battle of Britain Class 4-6-2 Tender Locos (1961-1963) R.358S "T.C. Series" "Davey Crockett" Western 2-6-0 Locos (1962-1965) R.651S "Rocket" locomotive. (1963-1966) etc... Some Examples of Synchrosmoke fitted locomotives. R.51S G.W.R. 0-6-0 Pannier Tank Locos (1972) R.051 G.W.R. 0-6-0 Pannier Tank Locos (1973-1974) R.52S B.R. "Jinty" 0-6-0 Tank Locos (1964-1972) R.052 B.R. "Jinty" 0-6-0 Tank Locos (1973-1975) R.52AS L.M.S. Maroon "Jinty" 0-6-0 Tank Locos (1970-1973) R.52RS L.M.S. Maroon "Jinty" 0-6-0 Tank Locos (1970-1973) R.54S "T.C. Series" Transcontinental Pacific Tender Locos.(1964-1970) R.54NS "T.C. Series" Transcontinental Pacific Tender Locos. "1542" late production models with 8-wheel "Gresley" "Flying Scotsman" Non Corridor Type tender fitted with Exhaust Steam Sound (1971-1973) R.59S B.R. Class 3MT 2-6-2 Tank Locos (1969-1972) R.150S B.R. B12 4-6-0 Tender Locos (1964-1969) R.150NS N.E. Black "7476" B12 4-6-0 Tender Locos (1976-1978) R.251S B.R. Lined Black "Deeley" Class 3F 0-6-0 Tender Locos (1964-1965) R.259S B.R. Britannia Class 7 4-6-2 Tender locos (1964-1970) R.259NS B.R. Britannia Class 7 4-6-2 Tender locos with Exhaust Steam Sound (1971-1972) R.258S B.R. Lined Maroon Princess Royal class 8p 4-6-2 Tender Locos (1964 & 1969) R.258S L.M.S. Maroon Princess Royal class 8p 4-6-2 Tender Locos (1970) R.258NS L.M.S. Maroon Princess Royal class 8p 4-6-2 Tender Locos (1971-1974) R.356S B.R. Battle of Britain Class 4-6-2 Tender Locos (1964-1969) R.377S G.N.S.R. Brown "Jinty" 0-6-0 Tank Locos (1970-1972) R.452 L.M.S. Maroon "Jinty" 0-6-0 Tank Locos (1973-1974) R.558S Battle Space Khaki "Jinty" 0-6-0 Tank Locos (1966-1967) R.661S “Old Smokey Set” Weathered B.R. Lined Black "Deeley" Class 3F 0-6-0 Tender Locos (1965) R.653S "T.C. Series" Continental "Prairie" 2-6-2 Tank Loco (Red frames and wheels, two domes) (1969) R.866S L.N.E.R. Green B12 4-6-0 Tender Locos (1970) R.866NS L.N.E.R. Green B12 4-6-0 Tender Locos with Exhaust Steam Sound (1971-1974) R.869S S.R. Battle of Britain Class 4-6-2 Tender Locos (1969-1972) etc... From the instruction leaflet supplied with Synchrosmoke (Post 1964) smoke fitted models, 1969 edition... SYNCHROSMOKE (British Patent No. 961630) OPERATING INSTRUCTIONS Pierce the narrow end of the capsule of smoke oil with a household pin. Place the filling funnel in the chimney of the locomotive. Hold the capsule over the funnel and squeeze the capsule so that seven or eight drops of smoke oil pass through the hole in the cover of the smoke generator beneath. DO NOT OVERFILL. It is important that the fluid enters the generator and does not run over the body or chassis of the locomotive. In the case of locomotives R.259S, R.356S, and R.869S the reservoir is longer and four or five more drops may be added, if so desired, in order to give a longer run between refills. Blow gently into the top of filling funnel and then remove it from the chimney. Replace pin in oil capsule. Start the locomotive and run in the usual way. After the train has been in motion for a few seconds, smoke should appear and continue to be discharged from the chimney, while the model is travelling, until the supply of oil in the generator is exhausted. Best results will be obtained if the locomotive is run at a good speed. Additional supplies of smoke oil are available under reference number R.521. MAINTENANCE If, after a period of use, the smoke generator fails to operate when supplied with smoke oil, the element may need replacing. Elements are available as spare parts under reference number X.549. To fit an element, the body of the locomotive should be removed from the chassis. Next the lid of the smoke generator must be lifted off. In the case of models R.259S, R.366S and R.869S the screw in the centre must be withdrawn to release the lid, but in other models it is only a press fit. The screw (where fitted) retains the complete smoke generator in position on the chassis and care must be taken not to dislodge the unit whilst the screw is removed. For locomotives R.59S and R.653S the complete top section of the smoke unit must be removed. The cartridge-type element may be lifted out and the replacement inserted in its place. Any filling material, which may have been removed with the old element, should be repacked below element level before the new element is inserted. The element should be well pressed down into position, to make good contact at both ends, before refitting the lid. In R.259S, R.366S and R.869S the screw and the brass tag eyelet must be replaced correctly, before refitting the body. SPARE PARTS Spare Parts may be obtained either from Tri-ang Hornby model railway stockists or direct from the factory. Made in Great Britain by ROVEX TRI-ANG LIMITED WESTWOOD, MARGATE, KENT These days, spare parts can be found on Ebay, and other places... The last "Hornby" smoke unit was made from plastic (!) and is the one that can cause most damage if run too long without oil. The unit itself can melt, and the heat can damage the body. The other Tri-ang Units are made from metal, and are more robust. The Seuthe type can get hot, as the whole unit gets warm. The Synchrosmoke units are more likely to burn out the element (which is removeable) if run too long without oil. So, if you are worried about running without smoke oil, you can wire a switch in the loco to turn the smoke unit off...or with the Synchrosmoke unit, remove the element... Cleaning the oil out is not really neccesary, as the Synchrosmoke unit has a fibre wadding to soak the oil into... Smoke Oil for these units is available from various retailers. (Including Gaugemaster who are Seuthe Stockists...) One Brand Name to look for is Seuthe, who made the Smoke Oil used by Tri-ang Hornby for many years (Sold as R.521). Old Stock Smoke Oil, R.521, is also sometimes available on Ebay...
  12. Hi all... I am looking for some parts to fit a Hornby "Unrebuilt" (As Originaly built!) West Country or Battle Of Britain China Made Loco. The main part is the metal Ballast Weight from the Loco Chassis. The original owner of this loco removed it for some reason! Another part is are the "firebox side" from the Drivers Side below the cab (Port Side). This is the black part that the pipes fit onto, in front of the Generator. Also required are the steps mounted on the tender chassis, and a ladder from the back of the tender. (This is the taller water tank tender, from a Battle Of Britain, "97 Squadron"). Regards Sarah...
  13. Workbench @4092

    Hi Bill. So good to see your 73 "eraning its keep"! Some good ideas there...
  14. CJR's Turntable Workbench (first attempt)

    Hi. The kit does not contain any Running Track parts. Only the deck and "Over-Girder" Sides, and a circle of plastic "rail" with a pivot boss on a cross piece in the centre. This plastic rail is for the carrying wheels either end of the deck to run on. You would need a length of track to fit the deck, and any approach rails would need raising to meet the deck rails. Connecting the power feeds to the deck would need some form of wiper and track, it is possibly the hardest part to set up! Original Airfix Turntable, modified with Tri-ang Series 3 track (1958-1962). Have you cosidered using the Hornby turntable? The basic unit has been around for ages now, and older ones can be quite reasonably priced. It is designed to fit into "Train Sets", so has almost everthing already done, ready to go. Some early turntables were hand operated, most newer ones are motorised. I have modified a Hornby Turntable using Airfix/ Dapol Turntable kit parts... Some Information here... http://modelrailwaysandroadszone.co.uk/phpbb/viewtopic.php?f=36&t=329 Or another option...Hornby Turntable with Peco Girder Bridge Sides... More Hornby Turntable Information:- http://www.newrailwaymodellers.co.uk/electronic-turntable.htm http://www.ehattons.com/8291/Hornby_R070_Electrically_operated_turntable/StockDetail.aspx